How To Remove Watch Links Without Tool

November 9, 2020

With the watch band on your wrist, gather the slack in the band and hold the links together to simulate them being removed. Protect your pulsar watch face by laying it face down on the optical cleaning cloth while you are sizing the band.

Diamante bracelet compatible for Samsung Galaxy Active

How to remove links from an expansion watch band;

How to remove watch links without tool. Look between the last five or six watch links, on the side of the band without the clasp, to locate the pins that secure the removable watch links. In this guide, we will explain how to use the metal link removal tool to remove links so you can shorten your watch bracelet. Spread your optical cleaning cloth out on a flat surface.

Removing links from your rolex: When you are satisfied with the way it is positioned, turn your wrist over so that the watch band clasp side is facing up. Learn how to remove watch back without tools in the video below.

When you need to adjust the length of your metal watch band by removing links, it helps to know exactly how many links you need to remove. However, the watch from which i removed links had a lot. For the best chance of success at diy fossil watch link removal, purchase a watch link removal tool kit.

I have tried this on seiko, citizen, ciancci, timex, casio and armitron the method should work on most metal band. On cheap, simple watches, your thumbnail is the perfect tool. These are inexpensive and widely available online, and they usually include a watch band holder, a pin punch tool and a small hammer.

Before you remove any links from the other side of the band, put your watch back on and check to see how it fits. After the appropriate number of links have been removed the separated ends of the watch band can be reunited and secured by replacing the pins. This tool is just as simple as the first.

The watch band holder is very useful, as it leaves both hands free for the task. Once you have done that, you need to operate the jaxa wrench or case wrench so that the wrench can get hold to two or more of the watch’s notches. A lot of the time there will only be one screw, and one rounded end that looks like a pin head.

I’m assuming if you are trying to get the back off without proper tools, you don’t have any training on what is inside. Remove/resize metal strap watch links with no visible pins this is the video that helped me remove links from my brand new invicta gunmetal strap watch which didn’t have any visible pins. This is pretty much up to you, but you might want to remove an even amount from each side of the clasp.

I’ll tell you how to do both. Alternatively for our classic stainless steel range you may need to use a watch link remover tool similar to that pictured below: Hold the watch so that both disconnected ends line up with each other.

You can press the bar in from either end. After doing a quick search online for “how to remove watch links”, i got the basics but noticed that there wasn’t really anything about watches with two screws in either end of the links. You may also be to remove it without any tools, just by using your hands, but this will be trickier.

Position the watch on your wrist exactly the way you intend to wear it. An hour of searching on youtube later, i found this video and was able to remove the links using a sharp knife (instead of a pin, which i didn’t have!) Hold your watchband in one hand while pressing upwards on the part closest to the case while pressing downwards to remove the link.

Inspect the backside of the links. Remove another pin on the other side of the same link and that link should drop out. Once you have verified the number of links you need to remove, take the watch off again.

On the other side of the link, you will see slits for a screwdriver. Try and remove the same number of links from each side of the clasp mechanism. To remove your links, use the jewelry punch tool.

Here are a few of these methods you could try to remove the back from your watch. After determining how many links to remove, locate the links closest to the clasp. Next step is to remove the screws from the link.

If this is the case for you, you can size it to your liking by following a few simple steps. If there is no arrow cast onto any of the links, then your links are held together by threaded watch pins. Otherwise, proceed with the current step.

I’ll tell you first that no good will come of this unless you. You line up the link hole with the pin, and push. The watch strap will now be in two.

If you have a spring bar tool, insert the pronged fork end between the band and where it connects with the watch shoulders. Turn the watch band over. Wrap the band around your wrist and hold the disconnected ends together with your other hand.

On one side of the link, you will see smooth circles (which are the bottoms of the pins). How do you remove a watch back without proper tools? When you push the punch into the space where the hole is, you will notice a peg going out the other end.

For help with this view our article on how to determine how many links to remove from your watch band. Then gently apply pressure on the tool, pushing lightly away from the watch. Remove the watch band from the tool and extract the pin.

The pin pops out in a second.this tool is better for some people to use since the previous one requires you to lay the watch flat.with this device, you don’t have to, because you hold the watch with one hand and pop the links out with the other. Push the ends together so that the links become interlocked (first photo). To open the back of a screw off watch type, you first need to secure the watch in place.

If the watch has an indentation for the hinge, you should focus your efforts on it. Feel free to do the link test again and see if you still need to remove the number of links you expected. First, determine where you will remove the links.

If you look at the links of your watch and you see a spot for a pin on each side of several links, then this method will work for you. You'll notice that the ends on the punch will easily fit into the small holes of the watch. On the links you intend to remove, use the pin pusher to gently take the pin out of the links, making sure to do so in the direction of the arrow to the link.

Count the overlap and add one. Once complete, reinsert the pin to rejoin the bracelet! Plan to remove an equal or close to equal number of links from each side of the clasp so that the claps remains in the center of the strap.

For our ceramic style stainless steel bands, simply use a pin to release the band link and remove as many links as required. This is where the needle nose pliers may be needed to finally extract the pin from the strap. Attach one end of the band to the case of the watch and wrap the band around your wrist.

Before you start, measure how many links you will need to remove to resize the band for your wrist. Click subscribe for more money saving useful tips remove or adjust links from a metal watch band can be expensive if taken to a jewellers let alone time consuming, with a simple tool and an easy method you can do it yourself pretty quickly without skills are knowledge of the tools. The only real restriction is that the watch cannot have screws holding the back to the case.

People often buy a stretch watchband only to find it is too big for them. Repeat on the opposite side of the watch to remove the other half of the watch band.

Pin on Iwatchcandy

Pin on Téléphones portables