How To Sew A Pillowcase Cover

March 3, 2021

Place one or two pieces of heat n’ bond along the edge of the fabrics, about 1″ from the sides, and then press the pieces of fabric together with an iron. Match up the raw edges of your cuff withe the right side of your pillowcase body, pin and sew with a 1/2″ allowance.

Sew a Buttoned Pillow Cover Sewing projects Diy throw

Cut your fabric into a piece of fabric that measures 21 inches x 45 inches.

How to sew a pillowcase cover. I bought two pillow forms from ikea and decided to make some envelope pillow covers. I used 2 pieces for extra reinforcement. For my pillow i used a quilted velvet so i did not have to iron it but if your fabric allows it then iron out any wrinkles that you can.

This is to turn the pillowcase rightside out. Take the pillow fabric to your sewing machine again and sew along the edge of the zipper to attach it to the pillow cover fabric. Cut two more pieces of fabric each measuring 16 inches by 11 inches.

The fold should go all the way from the pillow to the end of the point. Turn the cover right side out. I almost always sew the cover a bit smaller than the pillow form to ensure a tight fit.

The first method is to use one continuous piece of fabric. Wash and dry your fabric. This is optional but it adds extra strength to the seam and i love the decorative look.

Add a top stitch, about 1/8″ over from your seam edge. Cut your pillow fabric squares in a straight line using a rotary cutter or fabric scissors. It would be nice if the instructions either pointed that out, or were adjusted to fully cover the pillow.

Now, you should have a large piece of fabric that is beginning to look like an open pillowcase! Keep the stitches about 0.25 in (0.64 cm) or less from the zipper. Wash, dry, and iron your fabric.

Fold the fabric in half and pin the right sides together. Fold the cuff fabric over the rolled up outer fabric and line it up with the raw edges on the other side. It’s so easy anyone can do this.

For the standard size pillowcase, start by cutting out a rectangular piece 27″ x 43″ big, from the main fabric. If you prefer a lose fitting pillow cover, vary your measurements accordingly. Pillowcase size vs pillow size.

She’ll teach you to hem each end then sew up the sides. Sew a wide, but tight zigzag stitch along the very outside perimeter of the pillow. You will now have a tube of fabrics.

Cut the cuff fabric into a 12 x 43 inches piece. You will have the main fabric inside of the cuff fabric pin then sew using a 1/4″ seam allowance along the length of the fabrics through all layers making sure not to catch the rolled up fabrics. I share a simple video and a written tutorial of how to create your own diy no sew pillow cover.

Be sure to lay the seams flat so that there isn’t a bump in the. Another plus to this style of the pillow is that it makes it very easy to take off the cover and wash when needed. The finished pillowcase is 1 wider than the pillow.

How to sew an envelope pillow cover: Sew along the periphery with a 1/4 inch allowance. Sew a straight stitch along the edges of the zipper and pillow cover.

Insert your pillow from inside. How to sew a pillow cover prepare the fabric. This is for an 18 inch pillow form.

This is the easiest diy no sew pillow cover tutorial you will find. Diy no sew pillow covers. Starting in the middle on the bottom edge, place the raw edge of your bias tape along the raw edge of your fabric.you want all 3 raw edges to match perfectly.

Learn to sew a pillowcase cover tutorial by school of decorating. In just 10 minutes you can create an envelope style closure pillowcase that fits easily over your throw pillows. Grab the front piece of your pillow cover and place it in front of you, good side up.

Keep the cover in the right sides together position and pin all around the edges. For the length of the pillowcase, i add 10 to the length of the pillow. Again, if you are making a pillowcase for a larger pillow then you will need to adjust how much you are cutting off (you will cut off less).

Measure the dimensions of your pillow insert, then add 5/8” on all the sides to create an allowance. How to sew a pillowcase. For the king size pillowcase, cut out the main fabric into a piece measuring 31″ x 43″ in dimensions.

I love the instructions, but i was disappointed when the standard size pillowcase instructions just barely covered the pillow and i had pillow peeking out the end. We recently got a new couch and decided to cover some pillows to make it a little more comfortable. Pin the front and back pillow pieces together, right sides facing, aligning the edges.

If you're looking for a throw pillow cover pattern that's fast and easy, this is the tutorial for you. Iron it if you can. Follow these steps to machine sew your own throw pillow cover like a pro:

Repeat this on the bottom of that side, then do the same for the top and bottom of the opposite side of the cover. Measure your pillow and make the necessary adjustments. This allows for a nice, 3.5 hem.

The lengths seem a little short. These two panels will form the back envelope section of the pillow cover. Open the zipper a little (2 inches or so).

Serge or zig zag to finish the seam. Make sure the “right” side of your fabrics are facing together (the pretty side of the fabric). You can finish the edge with zig zag stitch for a neat look inside.

Repeat with the other side. (i like to pin the ends of the zipper side up like they'd sit if the zipper wasn't there) sew around the edges using a 1/2 inch seam allowance, backstitching at the beginning and end. Cut it so that it measures 34 inches long and 36 inches high.

Investing in a rotary cutter and cutting mat to make perfectly measured and straight, clean lines when cutting your fabric was. Follow the link for the guide on this website. With a seam ripper, remove the basting stitches along the zipper tape, and from the opening.

Turn your pillowcase right side out through the opened zipper. First, fold over the top edge of the fabric on 1 side of the pillow cover, tucking in the corners like you would if you were wrapping a present. Cut out the cuff fabric into a piece that’s measuring 11 x 43 inches.

In the first video, she shows us two different ways to sew these easy envelope pillowcases. When i’m in need of a very quick decor change in my home, i buy a little bit of new fabric and whip up a couple of throw pillow covers. This gives a bit of room around the pillow, allowing for easier insertion of the pillow into the pillowcase.

Pin face sides together on one of your small end pieces and the long side of the main pillow cover.

Easy Sew Envelope Pillow Covers No sew pillow covers